In October We Wear Pink Gang pink Halloween halftone DTF transfer design

In October We Wear Pink Gang

Youth [8 × 10 in.]
$3.00
$3.00
Skip to product information
In October We Wear Pink Gang pink Halloween halftone DTF transfer design
1/3
In October We Wear Pink Gang

In October We Wear Pink Gang

$3.00
$3.00

Printed, Cured & Ready to Press

Ready to press

Every transfer arrives printed, powdered, cured and cut. No printer, no powder and no artwork prep needed.

  • Place it on the garment
  • Press with the settings for your fabric
  • Peel the film and you're done
See the press guide

Already Cut. No Weeding

Already cut for you

We trim every transfer before it ships, so there's no cutting and no weeding.

  • Saves time on every shirt
  • Clean edges, ready to place

Youth to Adult 3XL Sizes

Pick your size

Each size card shows the printed artwork area in inches.

  • Youth for youth shirts and hoodies
  • Adult S-L for most adult shirts
  • Adult XL-3XL for bigger garments

The size guide below shows each size to scale on a shirt.

See sizes to scale

Cotton, Polyester & Blends

Fabrics

Press-ready DTF works on cotton, polyester and blends, light or dark garments.

  • Cotton: 300°F for 10 seconds
  • Polyester: 280–290°F for 10–12 seconds
See the press guide

Printed in Davie, FL

Printed in Davie, FL

Printed in-house by DIY Printz at 5051 S State Rd 7, Unit 505, Davie, FL 33314.

  • Local pickup available
  • Shipped via UPS Ground
  • Free shipping on orders $80+

Built to Last Wash After Wash

Care

Wait 24 hours before the first wash.

  • Turn inside out and wash cold
  • No bleach or fabric softener
  • Tumble dry low or hang dry
Transfer Size
  • Printed & cured
  • Already cut
  • Just press & peel
  • Cotton & polyester

Save on this order

New customers

20% off your first order

Enter the code at checkout on your first DIY Printz order.

First order only. One use per customer.

Wholesale · VIP10

10% off every order

Spend $3,500 in 12 months and VIP10 unlocks 10% off DTF, UV, sublimation & specialty transfers.

See VIP10

Transfer sizes

Pick your print size

Shown to scale on a shirt so you can see the coverage before you order.

Sizes are the printed artwork area. Garment shown for scale.

Print & press ready

Printed. Cured. Ready to press.

Professionally printed by DIY Printz in Davie, FL. Already cut — just place, press and peel. No trimming, weeding or artwork prep.

  • Ready to pressPrinted, powdered, cured and cut.
  • No cutting or weedingAlready trimmed — just place and press.
  • Cotton & polyesterPress settings for both below.
  • Multiple sizesPick the print size that fits your garment.

In October We Wear Pink Gang — Halloween Meets Pink October

In October We Wear Pink Gang brings Halloween attitude and Pink October awareness together in one bold streetwear design. Horror-inspired characters, pink ribbon imagery and a vivid pink, black and white palette create a striking seasonal look. Detailed halftones, distressed textures and layered artwork give this design its distinctive character.

Choose the full-size print-ready PNG for your own printing setup, or select a ready-to-press DTF transfer professionally printed by DIY Printz. Physical transfers arrive printed, cured and already cut. Just place, press and peel.

  • Halloween-inspired Pink October artwork
  • Bold pink, black and white colors
  • Horror characters and pink ribbon imagery
  • Detailed halftones and distressed textures
  • Digital PNG and physical transfer options

Choose Your Size

Print-Ready PNG File

Artwork Size: 16 × 20 in.

Receive the complete artwork as a full-size, print-ready PNG file for your own compatible printing setup. The digital design is supplied at its original proportions without resizing.

Youth

Transfer Size: 8 × 10 in.

Designed for youth apparel while preserving the original artwork proportions. This is the smallest available size. The design is not reduced below 8 inches wide to help maintain the clarity of its characters, lettering and fine halftone details.

Adult XS-L

Transfer Size: 11 × 13.75 in.

Recommended for adult XS through L garments. A balanced front-print size that maintains the artwork's original proportions, layered details and bold visual impact.

Adult XL-3XL

Transfer Size: 16 × 20 in.

The full-size transfer option for adult XL through 3XL garments. Designed for a large, statement-making front print with maximum artwork detail. Check your garment's available print area before ordering.

Designed With Intentional Halftones

This artwork features intentional halftones, distressed textures and open areas throughout the design. These elements create depth and a textured streetwear finish without relying on solid blocks of ink. When pressed, portions of the garment color may show through the open areas and become part of the finished appearance.

These details are intentional design features, not missing ink or printing defects.

Tip: For the best visual results, use the listed transfer dimensions and choose a garment color that complements the pink, black and white artwork. Avoid reducing the Youth design below its 8-inch minimum width.

Ready-to-Press DTF Transfers

Every physical transfer arrives professionally printed, powdered, cured and cut. No weeding or artwork preparation required. Compatible with cotton, polyester and blended fabrics.

Simply position your transfer, heat press and peel according to the recommended application instructions.

Cotton and polyester press settings are in the pressing guide below.

Print & press ready

How to press your DTF transfers

Every DIY Printz transfer arrives printed, powdered, cured and cut — ready to press. Choose your fabric for the exact settings, then follow the steps.

Press settings by fabric

100% cotton & cotton blends

Cotton

Hot or cold peel
Temperature
300°F149°C
Time
10 sec
Pressure
Medium / firm
Peel
Hot or cold

Finishing press: cover with parchment and press 5 sec at 300°F.

Hot peel right away for a faster workflow, or let it cool about 60 seconds for a cold peel — follow the peel type printed on your order.

100% polyester & performance wear

Polyester

Cold peel preferred
Temperature
280–290°F138–143°C
Time
10–12 sec
Pressure
Medium
Peel
Cold (60 sec)

Finishing press: cover with parchment and press 5 sec at the same temperature.

Lower heat on polyester. Too much heat can pull garment dye into the transfer (dye migration). Cold peel reduces that risk.

Step by step

  1. 01

    Pre-press

    Press the blank garment 3–5 seconds to remove moisture and wrinkles. Let it cool briefly.

  2. 02

    Position

    Place the transfer white side down, image facing up. Make sure it's flat and aligned.

  3. 03

    Press

    Press using the temperature, time and pressure for your fabric above.

  4. 04

    Peel

    Peel smooth and steady — hot right away or cold after about 60 seconds, based on fabric and film.

  5. 05

    Finish

    Cover with parchment, Teflon or butcher paper and press 5 more seconds for durability.

Film didn't release clean?

Lay the film back down in place, press again for a few seconds, then peel again. Use a heat press — household irons can't hold consistent heat or pressure.

Wash & care

  • Wait 24 hrs to wash
  • Turn inside out
  • Machine wash cold
  • No bleach or softener
  • Tumble dry low or hang
  • Don't iron the design

Settings are reliable starting points. Heat presses vary — always test on a scrap or hidden area first, especially on performance or specialty fabrics.

Support Center

Frequently Asked Questions

Questions about press-ready DTF transfers, sizing, pressing and care.

Press Ready Transfers

Ordering & Sizing

What you get with a printed, ready-to-press DTF transfer from DIY Printz.

What do I receive?

A professionally printed DTF transfer — printed, powdered, cured and already cut — ready to heat press onto your garment. No trimming, weeding or artwork prep needed.

Which transfer size should I order?

Choose the size that matches your garment: Youth for youth apparel, Adult S–L for most adult small through large shirts and hoodies, and Adult XL–3XL for a larger, more proportional print on bigger garments.

Why does the artwork have dots and open areas?

Halftones and distressed areas are intentional parts of the design. Portions of the garment color show through to create the finished look — so your shirt color will change the overall appearance.

Pressing

Application & Care

Get a clean, long-lasting press every time.

What fabrics can I press on?

DTF works on cotton, polyester, blends, denim and many performance fabrics. Use 300°F for 10 seconds on cotton and 280–290°F for 10–12 seconds on polyester. For specialty fabrics like nylon, test a small area first.

Hot peel or cold peel?

Cotton can be peeled hot (immediately) or cold (after about 60 seconds). On polyester, a cold peel is preferred to reduce the risk of dye migration.

Can I use a household iron?

We strongly recommend a heat press. Irons don't hold consistent temperature or pressure, which can cause lifting, cracking or poor durability.

What if the film doesn't peel off cleanly?

Lay the film back down in place, press again for a few seconds, then peel again.

How should I store my transfers?

Store transfers flat in a cool, dry place away from humidity and direct sunlight. Avoid bending or rolling them tightly.

When can I wash the garment?

Wait 24 hours before the first wash. Turn the garment inside out, machine wash cold, skip bleach and fabric softener, and tumble dry low or hang dry.

Still Need Help?

Talk to a real human.

Questions about sizes, pressing or bulk orders? Message us on WhatsApp or email us — we usually reply within minutes during business hours.

Message on WhatsApp Email Support Call (954) 404-8103