DTF Printer Parts
DTF Ink Tank – 2 L with Pump and Level Sensors
Part no. Approx. 0.53 gal (2 L)SKU PART-DTF-TNK-2L
- Approx. 0.53 gal (2 L) DTF ink tank
- Top-mounted pump with red and black leads
- Float-style level sensors and clear control box
- Large screw cap and twin-barb outlet
- Bulk ink supply / sub tank for compatible DTF printers
$89.99
Only 2 left
Not sure this is the right part? Ask our team
- Local pickup in Davie, FL
- Quality-checked by our team
- Fast shipping
Overview
This DTF ink tank is a bulk ink supply / sub tank in a white rectangular reservoir. It has a large screw cap, a bottom outlet with a twin-barb fitting, a pump on the lid with red and black leads, a clear control box, and two float-style level sensors. Capacity is approx. 0.53 gal (2 L).
- Approx. 0.53 gal (2 L) white rectangular ink tank
- Top-mounted pump with red and black leads and white connectors
- Two float-style level sensors and a clear control box
- Large screw cap and bottom outlet with a twin-barb fitting
This is a parts-level ink supply tank for compatible DTF printers. Fittings, tubing, and electrical connectors vary by machine. Match the barbs, plugs, and wiring to the tank and printer you already have, and confirm the supply voltage before you connect the pump or sensors. If you're not sure this is the right replacement, contact our team with your printer model or a photo of the current tank and connectors.
Specifications
- Type
- Bulk ink supply / sub tank
- Capacity
- Approx. 0.53 gal (2 L)
- Housing
- White rectangular reservoir with a large screw cap
- Outlet
- Bottom outlet with a twin-barb fitting
- Pump
- Top-mounted pump with red and black leads and white connectors
- Level sensing
- Two float-style level sensors on the lid
- Controller
- Clear control box with a circuit board on the lid
- Electrical
- Match the connectors and supply voltage on your printer. Voltage and pinout are not marked on the unit in our photo.
- Typical use
- White or color ink supply / circulation on compatible DTF printers
Confirm the part number on your current pump before ordering. Dimensions are approximate. Specifications may change without notice.
Compatibility
This bulk ink supply / sub tank is for compatible DTF printers that use a similar rectangular tank with a top-mounted pump, float-style level sensors, a control box, and a twin-barb outlet.
Printers, fittings, tubing, and electrical connectors vary. Match the outlet barbs, wire plugs, and control connections to the parts already on your machine. Do not assume voltage or pinout from the lead colors alone.
If you're not sure, send your printer model and a photo of the current tank, fittings, and connectors through our contact page before you order.
Installation tips
- Power the printer off and unplug it before you start.
- Note how the existing tank is plumbed and wired, including the outlet routing, sensor positions, and which plugs go to the pump and the control box.
- Set the new tank in place and connect the tubing fully onto the twin-barb outlet without kinking the line or forcing a mismatched tube size.
- Connect the pump and sensor leads only to matching connectors on your printer or controller. Confirm the supply voltage and pinout against your machine before you apply power.
- Fill the tank, close the screw cap, and check the fittings for leaks before you run ink through the line.
- Do not run the pump dry. After installation, confirm ink movement and that the level sensors respond as they should on your printer.
Support
- Questions about fit: send your printer model and a photo of the current tank, fittings, and connectors through our contact page.
- Local pickup: pickup is available in Davie, FL.
- Shipping: we ship this part from our shop. Transit time depends on your location and the service you choose at checkout.
DTF Ink Tank
Order the replacement part now, or browse the rest of our DTF printer parts.
