DTF Printer Parts
DTF Ink Filter – 10 μm Metal Mesh
Part no. 10 μm (10 micron)SKU PART-DTF-FLT-10UM
- 10 μm (10 micron) DTF ink filter
- Corrosion-resistant metal mesh
- Inline capsule with barbed fittings
- For compatible DTF white and CMYK ink lines
- Helps catch particles before they reach the printhead
$5.99
In stock
Not sure this is the right part? Ask our team
- Local pickup in Davie, FL
- Quality-checked by our team
- Fast shipping
Overview
This 10 μm (10 micron) DTF ink filter is an inline capsule filter with a corrosion-resistant metal mesh. It installs in the ink line on compatible DTF printers and helps catch particles and settled pigment before they reach the printhead.
- 10 μm (10 micron) filtration
- Corrosion-resistant metal mesh in a white polymer capsule
- Barbed fittings for common DTF ink tubing
- Approx. 1.77 in (45 mm) disc diameter
This listing is the 10 micron version only. Confirm the tubing size and filter style against the part on your printer. If you're not sure this is the right replacement, contact our team with your printer model or a photo of the current filter.
Specifications
- Type
- Inline disc capsule DTF ink filter
- Filtration rating
- 10 μm (10 micron)
- Filter media
- Corrosion-resistant metal mesh
- Housing
- White polymer capsule
- Approx. disc diameter
- 1.77 in (45 mm)
- Fittings
- Barbed hose fittings on both ends
- Typical tubing
- Commonly 0.24 in x 0.16 in (6 mm OD x 4 mm ID); some systems use 0.20 in x 0.12 in (5 mm x 3 mm) or similar. Confirm on your printer.
- Ink
- DTF white and CMYK ink lines on compatible printers
Confirm the part number on your current pump before ordering. Dimensions are approximate. Specifications may change without notice.
Compatibility
This 10 micron (10 μm) inline DTF ink filter is for white and CMYK ink lines on compatible DTF printers that use this disc-capsule style with barbed tubing fittings.
Printers and tubing sizes vary. Many DTF systems use 0.24 in × 0.16 in (6 mm OD × 4 mm ID) ink tubing; some use 0.20 in × 0.12 in (5 mm × 3 mm) or similar. Match the filter style and tubing size to the part already on your machine. This listing is the 10 micron version only.
If you're not sure, send your printer model and a photo of the current filter and tubing through our contact page before you order.
Installation tips
- Power the printer off and unplug it before you start.
- Note the flow direction and orientation of the filter you are removing, including any molded arrow on the housing.
- Install the new filter in the direction of the flow arrow when one is present. Ink should flow through the filter toward the printhead.
- Push the ink tubing fully onto both barbed fittings without kinking the line or forcing a mismatched tube size.
- Check the connections for leaks, then restore power and confirm ink flow before you run a job.
- Replace the filter on a regular maintenance schedule, and sooner if you notice reduced ink flow, pressure issues, or visible buildup. White ink lines often need more frequent replacement than CMYK lines.
- Do not reverse a used filter or keep a clogged one in the line.
Support
- Questions about fit: send your printer model and a photo of the current filter and tubing through our contact page.
- Local pickup: pickup is available in Davie, FL.
- Shipping: we ship this part from our shop. Transit time depends on your location and the service you choose at checkout.
DTF Ink Filter
Order the replacement part now, or browse the rest of our DTF printer parts.
