DTF Equipment
A-600 2-Head DTF Printer
- 2 × i3200-A1 printheads
- Up to 172 sq ft/h (16 m²/h) in 4-pass mode
- 23.6" (600 mm) DTF film width
- 5-color CMYK + White
- CCD camera nozzle check with auto cleaning
- Automatic moisturizing
Equipment pricing depends on configuration and delivery. Send us your details and we'll reply with a written quote.
- Written quote, no obligation
- Questions answered by our team
- Based in Davie, FL
Overview
The Super A-600 is a two-printhead, 23.6-inch DTF printer that brings production features to a growing shop. Two i3200-A1 heads print up to 172 sq ft (16 m²) of film per hour in 4-pass mode, with the same CCD nozzle check, touch-screen controls and automatic moisturizing as its four-head sibling.
- 2 × i3200-A1 printheads
- Up to 172 sq ft/h (16 m²/h) in 4-pass mode
- 23.6" (600 mm) DTF film width
- 5-color CMYK + White
- CCD camera nozzle check with auto cleaning
- Automatic moisturizing
What it prints
DTF transfers for T-shirts, hoodies, sportswear, uniforms, workwear, bags, caps and promotional products: cotton, polyester and blends.
Best for: shops getting started with their own DTF transfers, steady daily runs and businesses that want room to grow.
Pricing depends on configuration and delivery. Click Get Inquiry and we'll send a written quote.
Key features
CCD camera nozzle check
A built-in CCD camera checks the nozzles for you. If it finds a dropped nozzle it starts a cleaning cycle automatically, so you spend less time on test prints and waste less film.
Dual touch-screen controls
Two front touch screens run the everyday functions: electric paper pressing, low-ink alarm, lighting, front guide heating and automatic moisturizing.
Automatic moisturizing
Before a long idle period, one tap draws moisturizing fluid into the printheads. No manual syringing of fluid is needed.
Nozzle compensation
Nozzle compensation helps keep prints clean and even when individual nozzles misfire.
Mirror inspection area
Angled inspection mirrors let you see the printhead nozzles for checks, cleaning and routine maintenance.
Safety protection system
If the carriage hits an obstacle, the printheads stop immediately and a red status light comes on.
Tension unwinding system
Controlled film tension keeps media tracking straight, which matters most at high speed and on long runs.
Waste ink storage
A front-access waste ink tank with a drain valve makes daily maintenance quicker and cleaner.
Built-in ink shaking and air purification
An integrated ink shaking system and an on-board air purification unit are built into the machine.
Plug-and-play design
Designed to run without complicated assembly steps: connect power and start setup.
Multi-printer control
Supports centralized control of multiple printers for shops that run more than one machine.
Specifications
- Model
- Super A-600
- Printheads
- 2 × i3200-A1
- Ink
- DTF pigment ink
- Color configuration
- 5-color: C, M, Y, K + White
- Print speed, 4 pass (360 × 2400 dpi)
- Up to 172 sq ft/h (16 m²/h)
- Print speed, 6 pass (360 × 3600 dpi)
- Up to 118 sq ft/h (11 m²/h)
- Print speed, 8 pass (720 × 2400 dpi)
- Up to 86 sq ft/h (8 m²/h)
- Media
- DTF film
- Media width
- 23.6" (600 mm) DTF film
- Heating
- Pre-heater and rear heater
- Powder / curing controls
- Powder shaking control, powder amount control, temperature control
- RIP software
- PhotoPrint, Maintop or CADlink
- Interface language
- English
- Power
- 2.8 kW maximum (about 800 W in typical operation)
- Voltage
- AC 110 V / 220 V, 50/60 Hz
- Machine size (L × W × H)
- 71.9" × 31.3" × 51.8" (1827 × 795 × 1315 mm)
- Shipping size (L × W × H)
- 74.8" × 36.7" × 52.4" (1900 × 933 × 1332 mm)
- Shipping weight
- About 705 lb (320 kg)
- Operating environment
- 68–86 °F (20–30 °C), 45–70% relative humidity
Speeds are maximum rated values and vary with artwork, ink coverage and print mode. Specifications may change without notice.
Software
Each printer runs through a RIP (raster image processor) that handles color management, white-ink underbase and print queueing. The A-series is compatible with three RIP packages:
- Maintop: the RIP listed as the standard software for this printer.
- PhotoPrint
- CADlink (Digital Factory, Direct-to-Film edition)
Machine functions such as paper pressing, heating, moisturizing and low-ink alerts run from the printer's own touch screens. Interface language is English.
Ask us which RIP and license option comes with your quote.
Support
- Talk to a real person: our team answers equipment questions before and after you buy. Use Get Inquiry above or our contact page.
- Documentation: the product brochure and operating manual are available on request.
- Consumables: we carry DTF ink, film and powder. Ask which supplies match this printer.
- Warranty and delivery: warranty terms, shipping and lead time are spelled out in your written quote.
- Site prep: plan for a 110 V or 220 V circuit, a room kept at 68–86 °F (20–30 °C) and 45–70% humidity, and floor space for a 71.9" × 31.3" (1827 × 795 mm) footprint plus working room.
A-600 2-Head DTF Printer
Have questions or want pricing on this machine? Send a quick inquiry.
