DTF Printer Parts
DTF White Ink Circulation Pump – NKP-DA-B08B
Part no. NKP-DA-B08BSKU PART-DTF-WIC-B08B
- 24 V DC, 5 W peristaltic pump
- Part number NKP-DA-B08B
- Circulates white ink on compatible DTF printers
- Typical flow 10–60 ml/min
- For 0.09–0.16 in (2.4–4 mm) ID tubing
$24.99
Only 2 left
Not sure this is the right part? Ask our team
- Local pickup in Davie, FL
- Quality-checked by our team
- Fast shipping
Overview
The NKP-DA-B08B is a 24 V DC peristaltic pump used to keep white ink circulating in compatible DTF printers. A working circulation pump helps white ink stay mixed so it doesn't settle in the lines.
- Part number NKP-DA-B08B
- 24 V DC, 5 W peristaltic pump
- Typical flow 10–60 ml/min
- For tubing with a 0.09–0.16 in (2.4–4 mm) inside diameter
Match the part number on your current pump before you order. If you're not sure this is the right replacement, contact our team with your printer model.
Specifications
- Part number
- NKP-DA-B08B
- Type
- Peristaltic white-ink circulation pump
- Voltage
- 24 V DC
- Power
- 5 W
- Typical flow rate
- 10–60 ml/min
- Compatible tubing
- 0.09–0.16 in (2.4–4 mm) inside diameter
- Approx. size (L × W × H)
- 2.56 in × 2.17 in × 1.57 in (65 × 55 × 40 mm)
- Approx. weight
- 0.22 lb (100 g)
Confirm the part number on your current pump before ordering. Dimensions are approximate. Specifications may change without notice.
Compatibility
This pump is a replacement for DTF printers that use the NKP-DA-B08B 24 V white-ink circulation pump. That includes many desktop and A3 DTF systems with a 24 V circulation circuit, including printers that use XP600-class printheads.
Printers and ink systems vary. Confirm the part number printed on your existing pump, or send us a photo of the pump and your printer model through our contact page before you order.
Installation tips
- Power the printer off and unplug it before you start.
- Photograph or mark the tubing direction and the wire polarity on the existing pump so the new one is installed the same way.
- This pump runs on 24 V DC only. Do not connect it to a different voltage.
- Seat the tubing in the pump head without twisting or pinching it. Replace cracked or flattened tubing at the same time if needed.
- After install, check for leaks and confirm ink is moving through the white-ink loop before you run a job.
- If you're not comfortable replacing printer parts, have a qualified technician do the swap.
Support
- Questions about fit: send your printer model and a photo of the current pump through our contact page.
- Local pickup: pickup is available in Davie, FL.
- Shipping: we ship this part from our shop. Transit time depends on your location and the service you choose at checkout.
DTF White Ink Circulation Pump
Order the replacement part now, or browse the rest of our DTF printer parts.
