DTF Printer Parts
i3200 Printhead Data Cable – 14-Pin, 19.7" (50 cm)
Part no. E489701 – 14-pin, 19.7 in (50 cm)SKU PART-DTF-CBL-I3200-14P50
- 14-pin i3200 / 4720 printhead data cable
- 19.7 in (50 cm) flat flexible cable (FFC)
- Marked E489701, with standard AWM 20624 80 C 60 V VW-1 ratings
- Commonly 0.020 in (0.5 mm) pitch, about 0.59 in (15 mm) wide
- Sold as a single cable — an i3200 head typically uses 4
$7.99
Sold out
Not sure this is the right part? Ask our team
- Local pickup in Davie, FL
- Quality-checked by our team
- Fast shipping
Overview
This 14-pin flat ribbon (FFC) data cable carries printhead signals on compatible DTF printers that use i3200 or 4720 printheads. This listing is the 19.7 in (50 cm) length, marked E489701.
- 14-pin flat flexible cable (FFC)
- 19.7 in (50 cm) length
- For DTF printers using i3200 or 4720 printheads
- Pin pitch commonly 0.020 in (0.5 mm)
Sold as a single cable. Printers use different cable lengths, so measure the cable you are replacing and confirm the 14-pin count before you order. If you're not sure this is the right replacement, contact our team with your printer model or a photo of the current cable.
Specifications
- Type
- Flat flexible printhead data cable (FFC)
- Length
- 19.7 in (50 cm)
- Pin count
- 14 pin
- Pin pitch
- Commonly 0.020 in (0.5 mm)
- Approx. width
- Commonly 0.59 in (15 mm)
- Marking
- E489701, AWM 20624 80 C 60 V VW-1
- Fit
- i3200 and 4720 printheads on compatible DTF printers
Confirm the part number on your current pump before ordering. Dimensions are approximate. Specifications may change without notice.
Compatibility
This cable is for compatible DTF printers that use i3200 or 4720 printheads and this same 14-pin flat ribbon style, in the 19.7 in (50 cm) length. Some i1600 setups use the same 14-pin cable; a few use a 16-pin cable that is not interchangeable. Always count the pins and measure the length of the cable already on your machine.
An i3200 printhead typically uses 4 of these data cables. This listing is sold as a single cable. Cable lengths vary by printer (other common lengths include about 15 in and 17 in). Order the length that matches your routing.
If you're not sure, send your printer model and a photo of the current cable (including the connectors and any printed markings) through our contact page before you order.
Installation tips
- Power the printer off and unplug it before you start.
- Note which end goes to the printhead and which goes to the board, and the contact orientation of the cable you are removing. If you are replacing more than one cable, mark them so they go back in the same positions.
- Handle the cable by the stiffened ends. Do not crease or sharply fold the ribbon, and do not touch the metal contacts.
- Line up the contacts with the socket and seat the cable fully and straight. Do not force a mismatched pin count or a reversed connector.
- After install, check that both ends are fully seated and the ribbon is not pinched by covers or the carriage path before you restore power.
- An i3200 head typically uses 4 data cables. When you service a printhead, replacing the full set is common practice.
- If you're not comfortable working on the printhead connections, have a qualified technician do the swap.
Support
- Questions about fit: send your printer model and a photo of the current cable (pin count and length) through our contact page.
- Local pickup: pickup is available in Davie, FL.
- Shipping: we ship this part from our shop. Transit time depends on your location and the service you choose at checkout.
i3200 Printhead Data Cable
Order the replacement part now, or browse the rest of our DTF printer parts.
