Have an account? Log in to check out faster.
Same Day UV DTF Transfers – Auto Gang Sheet Builder
Order by 5 PM ET to qualify
Save on this order
20% off your first order
Enter the code at checkout on your first DIY Printz order.
First order only. One use per customer.
10% off every order
Spend $3,500 in 12 months and VIP10 unlocks 10% off DTF, UV, sublimation & specialty transfers.
How a UV DTF gang sheet works
A UV DTF gang sheet puts all of your logos, labels and full-color designs on one sheet of peel-and-stick film. You pay for the sheet, not per design, so the more you fit, the less each decal costs.
WholesaleWholesale · Same day
DIY Printz prints wholesale UV DTF transfers in-house in Davie, FL for print shops, resellers and brands that need peel-and-stick decals fast. Build sheet after sheet in the auto builder and we print them the same day.
Why shops buy wholesale from us
Order by 5 PM ET for same-day pickup, or by 1 PM ET to ship the same day. No rush fees.
Spend $3,500 in 12 months and VIP10 unlocks 10% off every UV, DTF and sublimation order.
Order one sheet or a full production run. Every order gets the same care.
Pick up in Davie, FL or ship UPS Ground to all 50 states. Free shipping on $80+.
UV DTFSame day UV DTF transfers
New to gang sheets? Upload your designs, set the quantity and size, and our auto builder nests them onto one print-ready UV DTF sheet. No design software needed.
Order by 5 PM ET for same-day pickup in Davie, FL.
DIY PrintzPeel & stick
UV DTF transfers are printed with UV-cured ink on adhesive film for vivid color and a glossy, scratch-resistant finish. Peel, place, burnish and lift the film. That's it.
Perfect for tumblers, glassware, phone cases, acrylic and packaging.
Peel · Stick · Burnish
No heat press needed. Your UV DTF transfers arrive printed on adhesive film, ready to peel and stick on any smooth hard surface.
Stainless, glass & ceramic
Peel the clear film slowly at a sharp, low angle, then let it set for 24 hours.
On curved tumblers, start in the center and burnish outward so the film follows the curve without bubbles.
Smooth glass surfaces
Peel the clear film slowly at a sharp, low angle, then let it set for 24 hours.
Make sure the glass is completely dry. Any moisture under the film can cause cloudy spots.
Coated & smooth plastics
Peel the clear film slowly at a sharp, low angle, then let it set for 24 hours.
Remove any protective film from acrylic first. Very soft or textured plastics may not hold well.
Finished wood, boxes & labels
Peel the clear film slowly at a sharp, low angle, then let it set for 24 hours.
Raw wood is too porous. Use sealed or finished wood, and test on porous packaging first.
Wipe the surface with rubbing alcohol and let it dry completely.
Peel off the white backing paper to expose the sticky side of the design.
Place the design on the surface and press it down lightly from the center out.
Rub the whole design with a squeegee or card, firmly, for about 30 seconds.
Slowly peel the clear film back at a sharp, low angle. If the design lifts, lay it down and burnish again.
Give the adhesive 24 hours to fully set before washing or heavy handling.
UV DTF is not for fabric
UV DTF is made for hard surfaces. For shirts, hoodies and bags, use our DTF transfers with a heat press.
Edges lifting?
Clean again with alcohol, burnish every edge firmly, and peel the clear film slower and lower. Textured surfaces may not hold.
These are reliable starting points. Surfaces vary, so test on a hidden area or a spare blank first.
Support Center
Questions about same day UV DTF transfers, the auto gang sheet builder, applying, care or shipping? Find the answers below.
No results. Try different keywords.
Quick answers before you order.
UV DTF transfers are full-color, peel-and-stick decals printed with UV-cured ink on adhesive film. They apply to smooth hard surfaces like tumblers, glass, metal, plastic, acrylic and sealed wood. No heat press needed. They give a glossy, scratch-resistant finish.
No. UV DTF is made for hard surfaces only. For shirts, hoodies and other fabric, use our DTF transfers.
Upload your designs, enter the quantity and set the exact size of each one. The builder auto-nests everything onto one print-ready sheet, so you don't need design software. Preview your layout before you check out.
Use our UV DTF upload gang sheet and we'll print your file exactly as submitted.
Choose a length from 1 FT (12") up to 10 FT (120"). The builder shows you how much fits.
How DIY Printz handles same day UV DTF orders from our shop in Davie, Florida.
Local pickup: order by 5 PM ET, Monday to Friday, and pick up the same day in Davie, FL. Shipped orders: order by 1 PM ET to ship the same business day via UPS Ground. Orders after the cutoff are printed the next business day.
No. Same day is our standard. Qualifying orders with print-ready artwork are printed the same business day at no extra cost.
Yes. Print shops, resellers and brands order from us every day with no minimums and no setup fees. Spend $3,500 in 12 months and VIP10 unlocks 10% off every order. Call (954) 404-8103 or email sales@diyprintz.com for bulk orders.
Yes. Free shipping on orders over $80. All orders ship UPS Ground from Davie, Florida. Most Florida deliveries arrive in 1–2 business days, and nationwide delivery is typically 2–5 business days.
5051 S SR-7, Unit 505, Davie, FL 33314, right next to the Seminole Hard Rock Guitar Hotel. Local pickup is available during business hours.
How to apply UV DTF transfers and keep them looking new.
1. Clean the surface with rubbing alcohol and let it dry. 2. Peel off the white backing paper. 3. Place the design and press it down. 4. Burnish firmly with a squeegee for about 30 seconds. 5. Slowly peel the clear film away at a sharp angle. 6. Let it set for 24 hours.
Most often the surface wasn't fully clean, or the design wasn't burnished long enough. Clean with alcohol, burnish firmly over every edge, and peel the clear film slowly and low. Textured or uncoated surfaces may not hold well.
For the longest life we recommend hand washing. Wait 24 hours after applying before you wash, and avoid harsh scrubbing on the edges.
Keep them flat in a cool, dry place out of direct sunlight, and leave the backing on until you're ready to apply.
Still Need Help?
Message us on WhatsApp or shoot us an email — we usually reply within minutes during business hours.