Have an account? Log in to check out faster.
Neon Auto DTF Gang Sheet Builder
Order by 5 PM ET to qualify
Save on this order
20% off your first order
Enter the code at checkout on your first DIY Printz order.
First order only. One use per customer.
10% off every order
Spend $3,500 in 12 months and VIP10 unlocks 10% off DTF, UV, sublimation & specialty transfers.
How a neon gang sheet works
A neon gang sheet puts all of your logos, names, numbers and artwork on one 22" wide sheet of fluorescent neon DTF. You pay for the sheet, not per design, so the more you fit, the less each print costs.
WholesaleWholesale · Specialty
DIY Printz prints wholesale neon DTF transfers in-house in Davie, FL for print shops, resellers and brands. Build sheet after sheet in the auto builder and we print them for you. Neon orders ship within 3–4 business days.
Why shops buy wholesale from us
Offer your customers a black light-reactive upgrade for events, parties and spirit wear.
Spend $3,500 in 12 months and VIP10 unlocks 10% off every DTF, UV and specialty order.
Order one sheet or a full production run. Every order gets the same care.
Pick up in Davie, FL or ship UPS Ground to all 50 states. Free shipping on $80+.
NeonNeon DTF Transfers
Upload your designs, set the quantity and size, and the auto builder nests them onto one print-ready neon sheet. No design software needed.
Printed in Davie, FL and shipped within 3–4 business days.
DIY PrintzPress it yourself
Fluorescent ink absorbs UV light and gives it back as bright, visible color. That's why neon transfers look bold in daylight and light up under a black light at parties, concerts and events.
Fluorescent is not glow-in-the-dark: the glow shows while the UV light is on.
Neon pressing guide
Your neon gang sheet arrives printed, powdered and cured, ready to press. Cut your designs apart, then press each one with the settings for your fabric, just like regular DTF.
100% cotton & cotton blends
Finishing press: cover with parchment and press 5 sec at 300°F.
Hot peel right away for a faster workflow, or let it cool about 60 seconds for a cold peel — follow the peel type printed on your order.
100% polyester & performance wear
Finishing press: cover with parchment and press 5 sec at the same temperature.
Lower heat on polyester. Too much heat can pull garment dye into the transfer (dye migration). Cold peel reduces that risk.
Cut each design off the sheet, leaving a small clear border (about 1/8"). Remove registration strips and order ID marks.
Press the blank garment 3–5 seconds to remove moisture and wrinkles.
Place the transfer white side down, image facing up. Use heat tape to hold it if needed.
Press with the temperature, time and pressure for your fabric above.
Peel smooth and steady: hot right away, or cold after about 60 seconds.
Cover with parchment or a Teflon sheet and press 5 more seconds for durability.
Want the strongest glow?
Use a true UV-A black light and a darker room. Neon pink, green, yellow and orange react the most. Cut and press one design at a time.
Film didn't release clean?
Lay the film back down in place, press again for a few seconds, then peel again. Use a heat press — household irons can't hold consistent heat or pressure.
Settings are reliable starting points. Heat presses vary — always test on a scrap or hidden area first, especially on performance or specialty fabrics.
Support Center
Questions about neon DTF transfers, the auto gang sheet builder, pressing, care or shipping? Find the answers below.
No results. Try different keywords.
Quick answers before you order.
Neon transfers are DTF transfers printed with fluorescent ink. The colors look ultra-bright in normal light and glow under UV, black light or "purple light". You press them onto garments with a heat press, just like regular DTF.
No. They are fluorescent, not glow-in-the-dark. They glow while a UV or black light shines on them and stop when the light goes off. That's normal.
Neon pink, green, yellow and orange react the most under black light. Bold shapes and thick lettering give the cleanest glow.
Upload your designs, enter the quantity and set the exact size of each one. The builder auto-nests everything onto one print-ready sheet, so you don't need design software. Preview your layout before you check out.
Use our neon upload gang sheet and we'll print your file exactly as submitted.
How DIY Printz handles neon DTF transfers orders from our shop in Davie, Florida.
Neon orders are printed and shipped within 3–4 business days via UPS Ground from Davie, Florida. Local pickup is available once your order is ready.
Yes. Print shops, resellers and brands order from us every day with no minimums and no setup fees. Spend $3,500 in 12 months and VIP10 unlocks 10% off every order. Call (954) 404-8103 or email sales@diyprintz.com for bulk orders.
Yes. Free shipping on orders over $80. All orders ship UPS Ground from Davie, Florida. Most Florida deliveries arrive in 1–2 business days, and nationwide delivery is typically 2–5 business days.
5051 S SR-7, Unit 505, Davie, FL 33314, right next to the Seminole Hard Rock Guitar Hotel. Local pickup is available during business hours.
How to press neon DTF transfers and keep them looking new.
Cut the design apart, pre-press the garment 3–5 seconds, place the transfer, then press at 300°F for 10 seconds with medium-firm pressure on cotton (280–290°F on polyester). Peel as directed, then do a 5-second finishing press with parchment. Full settings are in the press guide on this page.
Usually the heat, time or pressure was too low, or the film was peeled too soon. Lay the film back down, press again for a few seconds and peel again. Use a heat press: household irons can't hold steady heat.
Wait 24 hours, then wash inside out in cold water with mild detergent. No bleach or softener. Tumble dry low or hang dry, and don't iron directly on the design.
Still Need Help?
Message us on WhatsApp or shoot us an email — we usually reply within minutes during business hours.
